Does any one know jumper setting fror azza PT- 694/bx
 

Im working on an older HP pavillion 8570c w/a pentium 3 proccessor as well as a 3dfx Video card. The computer has, as best as Ive been able to figure out, a new Azza PT-694bx / 370 socket M.B w/ via694 chipset and on chip
I/O vt82c6869.
Im try to find out what the jumper setting are, if any, to enable/disable the on-board video. It seems as every site offering printed technical support or
diagrams are in Japenese or only provide a link to Azza and their not answering. Any help will be appriciated and a plus for your carma.

You should be able to anable or disable it in cmos.

You should be able to enable and disable onboard video in the BIOS. You can access the BIOS by either pressing F2, F8, F10, F12 or DEL during the computer's post.

If onboard video is determined through jumpers, the only help you're probably only going to be able to find is through HP or an HP Support Forum. Manufacturers use proprietary motherboards that are mass-produced for certain models of their computers. So even if Azza makes boards for the average consumer, your PT-994BX will most likely be different than one purchased from a retail outlet.

I think u can acces it by pressing F8.