Quote:
Originally Posted by fren  hi,
No SCSI, it's a plain ST380811AS in the Device Manager and jumper is set at 150. I would like to know if this is normal or there is a remedy to run it in its full speed. Thanks |
Your drive can't run at 300 as your motherboard doesn't have the right chipset to support this speed, if you want to try it just set the jumper to '300' and if you get a 'drive not detected error' then replace the jumper to the '150' setting and have a look for a SATA host adapter that supports autonegotiation. The highest your drive will go is UDMA 6.
http://www.seagate.com/staticfiles/s...100417177b.pdf 5X1 Internal SATA Port Multiplier from Addonics
Sorry about the wait!
Regards
Martin