Hi Lurkswithin: I think I am running into another stumbling block. I checked the GAG batch file, and it requires a diskette drive (a: or b, of which there is none on this new system. I could certainly hook one up temporarily, but it may not be enough to get things working. My C: is a RAID 0, which uses the Asus board built-in ICHR9 controller. In other words, the RAID drivers need to load in order to access that volume. To complicate matters even more, my secondary drive is a SATA-II running on the same controller, but not a member of the RAID. Even though there are several SATA connectors available on that board, they are all running on the same controller. There are no options to set this controller differently when using RAID. There are a few additional SATA connectors running on a different controller, but these are dedicated to eSATA. Any suggestions?